High Power Rotary Speed Control Switch /CE

• Rotary Number: Single Button
• Usage: Electrical Appliance, Machinery, Communication, Vehicle, Toys, Digital Products
• Standard: Standard
• Structure: Self-Reset
• Operation: Combined
• Certification: CE
• Model NO.: BRT-706/CE
• Condition: New
• Transport Package: Packed in Paper Box or Bubble Bags
• Specification: 86mm x 86mm x 43mm
• Trademark: iPuray
• Origin: China
• Production Capacity: 100000PCS/Year

Product Description

Product Description

Features:
BRT-706 is a speed control switch which has a built-in micro controller unit. It uses a rotary knob for turning on or turning off the motor, and for adjusting the motor's speed. BRT-706 is designed for easy installation and retrofit, directly fit into standard wall box where both hot wire and neutral wire are present.

1.Max Wattage: 600W; 
2.Operate on L&N inputs;
3.Good for AC Motor;
4.Stepless speed setting;
5.The Min Speed Value is adjustable;
6.Temperture Override Protection.

Specification Parameters:
 

Input Voltage	220~240V(50Hz/60Hz)	Operation Environment	No-condensation 20-90% RH,-20ºC~55ºC
Wattage	600W	Load type	Motor
Mounting Hole Spacing	60mm	Matching Box	75mm x 75mm x 50mm
Dimension	86mm x 86mm x 40mm	Weight	105g

Operation Guide:
BRT-706 speed control switch delivers stepless smooth control, and the speed is adjusted by using the rotary knob on the front.

Turn on or turn off: Rotating the knob clockwise away from the "OFF" position will turn on the motor at its last speed and the fan is always turned on at the highest speed. Rotating the knob counter-clockwise to the "OFF" position will turn off the motor.

Adjust the speed: Rotating the knob clockwise will decrease the speed, and rotating the knob counter-clockwise will increase the speed.

Adjust the minimum speed: For the first time operation, adjusting the minimum speed may be necessary for some motors, or the motor may not move due to too low a driving voltage. There is a fine tuning dial on the side of BRT-706 speed control switch. This dial is used for adjusting the minimum speed.

First, set the fan speed at minimum using the front rotary knob. Then, rotate the dial to yield a minimum speed as desired.

Certifications

Company Profile