Product Description
Timer Switch with Daily Multiple Period Settings
(Neutral Required)
Features:
BRT-408 is the most advanced timer switch. It is controlled by a micro controller
unit and has very accurate timing capability. It is designed for easy installation and retrofit,
directly fit into standard wall box where both hot wire and neutral wire are present.
- One button for easy operation;
- Hidden panel of 9 keypads for setting up timer to prevent inadvertent changes;
- Up to 16 preset timing periods with precise On and Off time each day;
- Load up to 2000W;
- LCD display showing the current clock time, timing period #, and the current status of the switch;
- Good for all kinds of loads (Resistive, inductive, and capacitive);
- ABS-V0 flame resistance material;
- Classical 86 series design and high quality build.
BRT-408 timer switch has an LCD display and an On/Off button on the front. The LCD display shows the current time and the current status of the switch. The On/Off button is used for turning on or turning off a load. BRT-408 timer switch also has wiring terminal blocks on its back.
When the On/Off button is pressed,
The display shows On and the load will be turned on immediately;
When the On/Off button is pressed again,
If there is no timing period being set, the load will be turned off immediately and the display will show Off, and;
If there is timing period being set, the load will be turned on automatically during the preset timing period. Press the On/Off button will cancel the timing operation and turn off the load immediately.
The front plate can be flipped down from the top edge. A 9 keypad panel hidden behind the front plate is used for setting up the timer.
Specification Parameters:
Input Voltage |
220~240V(50Hz/60Hz) |
Operation Environment |
No-condensation 20-90% RH,-20ºC~55ºC |
Wattage |
2000W |
Load type |
All Types* |
Mounting Hole Spacing |
60mm |
Matching Box |
75mm x 75mm x 50mm |
Wall Mount Unit Dimension |
86mm x 86mm x 43mm |
Wall mount Unit Weight |
116g |
* An additional adaptor is required for capacitive loads.
Certifications
Company Profile