Product Description
BRT-K310S/K310A Ceiling Mount PIR Remote Control Switch
1,Input Voltage:100~240V/50 or 60HZ
2,With L&N Line inputs
3,Good for Infrared Remote Equipment
4,Working distance: 5~7m diameter at a height of 2.4m
Features:
BRT-K310A/S is a ceiling mount remote control which utilizes passive infrared (PIR) sensor to detect the heat (in the form of infrared energy) from people moving within a space. It can determine when a space is unoccupied and turns off the large loads such as air-conditioners, etc., automatically by sending out IR control signals.
- Capable of learning and memorizing infrared control codes of all kinds of appliances;
- Adjustable delay-off time from 1 minutes to 30 minutes;
- Good for all kinds of appliances that have infrared control, such as air-conditioners, TVs, fans, audios, etc.
- Easy installation onto ceiling with or without a holder;
- ABS-V0 flame resistance material; and
- High quality build.
Specification Parameters:
Input Voltage |
220~240V(50Hz/60Hz) |
Operation Environment |
No-condensation 20-90% RH,-20ºC~40ºC |
Control Mode |
IR |
Control Distance |
7m |
PIR Coverage Range |
5m in diameter when mounted at a height of 2.4m |
Mounting Hole Diameter |
68mm |
Dimension (max) |
Oval faceplate: 105mm Circular faceplate: 77mm |
Weight |
110g |
Wiring Diagram:
BRT-310 PIR remote control requires both hot wire and neutral wire for installation:
Hot wire (ACL): Coming from the power line with 220V;
Neutral wire (ACN): Usually coming with the hot wire; and
Installation using a holder
A holder is attached to the ceiling using screws first. Then, the PIR remote control can be easily snapped into the holder.
The holder is specially designed for BRT-K310 PIR remote control. Please talk to our sales representative when placing orders.
Installation without a holder
Without a holder, an opening in the ceiling needs to be made first. There are four steps:
Step one: Open a hole of 68mm in diameter in the ceiling;
Step two: Open the two flexible clamps on the side surface of the remote control;
Step three: Insert the remote control into the hole; and
Step four: The clamps will hold the remote control onto the ceiling tight and steady.
Operation Guide:
BRT-K310A/S PIR remote control needs a warm-up time about two minutes before it can operate properly. It has dip switches for adjusting the delay-off time. For the first time operation, BRT-K310A/S PIR remote control also needs to learn and memorize the IR remote control codes from regular remote control set. BRT-K310A /S PIR remote control has a button for this task as shown in below image as well.
Please rotate the front cover counter-clockwise to remove it so that the dip switches and the button for code learning are exposed.
Learn the IR remote control codes
Please refer to below image and follow the following steps to have BRT-K310A PIR remote control learn and memorize the IR control codes from IR remote controls sets of appliances.
- Turn on power to BRT-K310A PIR remote control, and set dip switch 4 to ON position. There is an LED flashing behind the PIR lens
- Press and hold the button for code learning until the LED is constantly on;
- Point the regular IR remote control of appliance to the PIR lens, and start to send OFF control signals;
- If the LED quickly flashes a few times, code learning has been successfully completed;
- To verify if code learning is successful, press the button for code learning to have BRT-K310A PIR remote control send out the control signals it just learned. The appliance should be turned off accordingly;
- Return dip switch 4 to OFF position.
Applications:
BRT-K310A PIR remote control can be used for automatically turning off various loads which use IR remote controls, such as lights, fans, appliances, or other kinds of electrical equipment. They are perfect for saving energy and bringing convenience and safety to our daily life and work.
They have wide applications at various locations such as stairwells, corridors, washrooms, offices, conference rooms in homes, schools, laboratories, hospitals, offices, etc.
BRT-K310S PIR remote control can be used for automatically turning on and off.
Certifications
Company Profile